#Mac emulator for ubuntu for mac os
#Mac emulator for ubuntu mac os x
#Mac emulator for ubuntu install
#Mac emulator for ubuntu full

If you get mol module not found errors, try insmodding it manually insmod /lib/modules/2.6.(your kernel version)-powerpc/misc/mol.ko In OS X, then set up the en3 network port manually, by allocating an appropriate IP (in my case 192.168.40.2 was a good choice), set Router and DNS server to the ip associated with your tun0 interface in linux (192.168.40.1) and the subnet mask to 255.255.255.0. Mine was given as follows: 6: tun0: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100 Once you have completed the setup, run ipВ addr to check the ip address for the tun0 interface. Now open up Safari or Firefox, and if you are lucky you should have a web connection.Дo as above, but without installing dhcpd. Make sure that en3 is set to configure with DHCP.

#Mac emulator for ubuntu mac os x

Once you have logged into to Mac OS X open up the system preferences. MOL creates a network tunnel called tun0 at the Linux end, and en3 on the Mac OS X end. Now run startmolВ -osx, and we can set up the network on the Mac OS X side. Then enable dhcp for the tun0 interface that mol uses, in /etc/default/dhcp, put the lineДЄnd in /etc/mol/tunconfig at the bottom just before

#Mac emulator for ubuntu install

Sudo apt-get install ipmasq dnsmasq dhcpd

You will need to install ipmasq, dnsmasq and dhcpd using synaptic or If you are using mol to use the iTunes music store, or watch flash on the web, then you will need to get networking running. See its manpage for more usage information.

#Mac emulator for ubuntu full

If you want mol to always start full screen, edit /etc/mol/ and change enable_xvideo:В yes to enable_xvideo: no CTRL + ALT + F7 should take you back to your Linux desktop. If the video modes are correctly configured then pressing CTRL + ALT + F8 (sometimes higher F keys) will take you to a full screen MOL. To exit mol, choose shutdown from the apple menu. You need to install the MOL package that you find on the desktop.

#Mac emulator for ubuntu for mac os

Now you should be able to run startmolВ -osx (just startmol for Mac OS 9), and Mac OS X will boot up in a window or on a new virtual terminal. Sudo dpkg-statoverride -update -add root root 4755 /usr/lib/mol/bin/mol

The following command makes sure you can run Mac-on-Linux as a normal user. If you get a random mess, blank screen or some other problem then press 'n'Д«y default, Mac-on-Linux requires root privileges to run. The red screen comes out as a stripes, but it seems to work anyway. You basically type 'y' to try out a configuration, and then 'y' if you can see a nice gradient on the screen. Then it is worth setting up the video modes, run sudoВ molvconfig (It may also crash if you give too much RAM I had to keep a ram_size of 48 in my molrc.macos.) Its possible to give mol more RAM than you physically have, and linux will deal with putting stuff into swap, but you are likely to end up with a slow system. In /etc/mol/molrc.osx (molrc.macos for Mac OS 9) find ram_size: 96 (or ram_size: 48 in molrc.macos) and change to at least 128 The default is 96mb, which is barely enough to boot Mac OS X (although ok for Mac OS 9 if you arn't planning to do much). There are a few settings you may want to play with be for you use mol. This assumes that you have a working install of Mac OS X or 9, on a partition on you harddrive somewhere. If you are not comfortable with editing text look at NanoHowto. Sudo apt-get install mol-drivers-macos # for MacOS 9 Sudo apt-get install mol-drivers-macosx # for MacOS X This can be done using Synaptic Package Manager or by running the following commands sudo apt-get install mol See AddingRepositoriesHowto for more information.

You may need to add this repository to get some of the drivers: В woody/. You will need to install the following packages mol and mol-drivers-macosx and/or mol-drivers-macos for MacOS X and/or MacOS 9 support. To install all of Mac-on-Linux, you'll need to enable the universe and multiverse, see AddingRepositoriesHowto for details. The MOL kernel modules are included in DapperDrake so it is no longer necessary to compile and install them manually. It is also possible to use MOL to install MacOS into a disk image, see manВ mol for more details. This howto assumes that you have a working install on MacOS on your computer. As it does not need to emulate a processor it runs at near native speeds. It requires a Mac OS (9/X) and PowerPC computer. Mac-on-Linux (MOL) allows you to run MacOS 9 and MacOS X from within Linux.

Remove boot loader out of memory problem.

To run Tiger and Eliminate Annoying Sluggish Behavior on MOL Install this Patched Version.

OS 9 Double Click and Slow Response Trouble.